Brushless motors with integrated drive

Technical specifications request information
  • Characteristics

    EN: Brushless servomotors with integrated drive. Power from 125 to 250 W

    USA: Brushless servomotors with integrated drive. Power from 1/6 to 1/3 HP

    MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.

    Rated torque up to 0.75 Nm.

    DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 16bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.

    All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.

  • Download
  • Configurator

request information

(*) required information

È necessario dare il consenso al trattamento dei dati personali